Critical error messages, Critical error message-tables – HP LaserJet 3055 User Manual

Page 348

Advertising
background image

Critical error messages

Critical error messages can indicate some kind of failure. Cycling the power might fix the problem. If
a critical error persists, the all-in-one might require service.

Critical error message-tables

Table 13-2

Critical error messages

Control panel message

Description

Recommended action

49 Error

The all-in-one has experienced an internal
embedded software error.

Turn off the power by using the power
switch, wait at least 30 seconds, and then
turn on the power and wait for the all-in-one
to initialize.

If the error persists, contact HP Customer
Care. See

HP Customer Care

or the

support flyer that came in the all-in-one box.

50.x Fuser Error

The all-in-one has experienced an internal
hardware error.

1.

Turn off the power by using the power
switch, and then wait at least 30
seconds.

2.

If a surge protector is being used,
remove it. Plug the all-in-one directly
into the wall socket.

3.

Turn on the power and wait for the all-
in-one to initialize.

If the error persists, contact HP Customer
Care. See

HP Customer Care

or the

support flyer that came in the all-in-one box.

51 Laser Error

The all-in-one has experienced an internal
hardware error.

Turn off the power by using the power
switch, wait at least 30 seconds, and then
turn on the power and wait for the all-in-one
to initialize.

If a surge protector is being used, remove
it. Plug the all-in-one directly into the wall
socket. Use the power switch to turn the all-
in-one on.

If the error persists, contact HP Customer
Care. See

HP Customer Care

or the

support flyer that came in the all-in-one box.

52 Scanner Error

The all-in-one has experienced an internal
hardware error.

Turn off the power by using the power
switch, wait at least 30 seconds, and then
turn on the power and wait for the all-in-one
to initialize.

If a surge protector is being used, remove
it. Plug the all-in-one directly into the wall
socket. Use the power switch to turn the all-
in-one on.

If the error persists, contact HP Customer
Care. See

HP Customer Care

or the

support flyer that came in the all-in-one box.

330

Chapter 13 Troubleshooting

ENWW

Advertising
This manual is related to the following products: