Copy problems, Preventing problems, Image problems – HP LaserJet 3055 User Manual
Page 365: Preventing problems image problems, The problem persists, see, Copy, Problems
Copy problems
Preventing problems
The following are a few simple steps you can take to improve copy quality:
●
Copy from the flatbed scanner. This will produce a higher quality copy than copying from the
automatic document feeder (ADF).
●
Use quality originals.
●
Load the media correctly. If the media is loaded incorrectly, it might skew, causing unclear
images and problems with the OCR program. See
Loading documents to fax, copy, or scan
instructions.
●
Use or make a carrier sheet to protect your originals.
NOTE
Verify that the media meets HP specifications. If the media meets HP specifications,
recurring feed problems indicate the pickup roller or separation pad is worn. Contact
HP Customer Care. See
or the flyer that came in the all-in-one box.
Image problems
Problem
Cause
Solution
Images are missing or faded.
The print-cartridge toner-level might be
low.
Replace the print cartridge. See
The original might be of poor quality.
If your original is too light or damaged,
the copy might not be able to
compensate, even if you adjust the
contrast. If possible, find an original
document in better condition.
The original might have a colored
background.
Colored backgrounds might cause
images in the foreground to blend into
the background, or the background
might appear in a different shade. If
possible, use an original document
without a colored background.
Vertical white or faded stripes appear
on the copy.
The media might not meet
HP specifications.
Use media that meets
HP specifications. See
The print-cartridge toner-level might be
low.
Replace the print cartridge. See
Unwanted lines appear on the copy.
Tray 1 (HP LaserJet 3050/3052/3055
all-in-one) or tray 2 (HP LaserJet
3390/3392 all-in-one) might not be
installed correctly.
Verify that the tray is in place.
ENWW
Copy problems
347