Pdes (mac os x v10.3 and mac os x v10.4), Installing software for macintosh – HP LaserJet 3055 User Manual

Page 40

Advertising
background image

To view Macintosh Configure Device when the all-in-one is connected to a network

1.

Open one of the following supported Web browsers:

Safari 1.2 or later

Microsoft Internet Explorer 5.0 or later

Netscape Navigator 4.75 or later

Opera 6.05 or later

2.

Enter the IP address of the all-in-one into the Web browser to open the Macintosh Configure
Device home page.

PDEs (Mac OS X V10.3 and Mac OS X V10.4)

PDEs are code plug-ins that provide access to all-in-one features, such as information about the
number of copies, two-sided printing, and quality settings. An installation program for the PDEs and
other software is provided on the HP LaserJet 3390/3392 all-in-one CD for Macintosh.

Installing software for Macintosh

This section describes how to install Macintosh printing system software.

Installing Macintosh printing system software for direct connections (USB)

This section explains how to install the printing system software for Mac OS X V10.3 and
Mac OS X V10.4.

The Apple PostScript driver must be installed in order to use the PPD files. Use the Apple PostScript
driver that came with your Macintosh computer.

To install the printing system software

1.

Connect a USB cable between the USB port on the printer and the USB port on the computer.
Use a standard 2-meter (6.56-foot) USB cable.

2.

Insert the printer CD into the CD-ROM drive and run the installer.

3.

Double-click the CD icon on the desktop

4.

Double-click the Installer icon.

5.

Follow the instructions on the computer screen.

6.

USB queues are created automatically when the printer is attached to the computer. However,
the queue will use a generic PPD if the installer has not been run before the USB cable is
connected. To change the queue PPD, open the Print Center or Printer Setup Utility, select the
correct printer queue, and then click Show Info to open the Printer Info dialog box. In the pop-
up menu, select Printer Model, and then, in the pop-up menu in which Generic is selected,
select the correct PPD for the printer.

7.

Print a test page or a page from any software program to make sure that the all-in-one software
is correctly installed.

22

Chapter 2 Software

ENWW

Advertising
This manual is related to the following products: