HP LaserJet 3055 - Manual (Page 58)

Loading input trays, HP LaserJet 3050/3052/3055 all-in-one
Priority input slot
The priority input slot on the HP LaserJet 3050/3052/3055 all-in-one holds up to 10 sheets of media
up to 163 g/m
2 (43 lb) in weight or one envelope, transparency, or card. Load media with the top
forward and the side to be printed facing up. To prevent jams and skewing, always adjust the side
media guides before feeding the media.
250-sheet input tray (tray 1)
The input tray holds up to 250 pages of 80 g/m 2 or 20 lb paper or fewer pages of heavier media
(25 mm (0.9 inch) or less stack height). Load media with the top forward and the side to be printed
facing down. To prevent jams and skewing, always adjust the side and rear media guides.
NOTE When you add new media, make sure that you remove all of the media from the input
tray and straighten the stack of new media. This helps to prevent multiple sheets of media
from feeding into the all-in-one, which can cause jams.
40 Chapter 4 Using the all-in-one ENWW