Changing the ring volume of the fax – HP LaserJet 3055 User Manual
Page 64
Changing the ring volume of the fax
The fax ring sounds when the all-in-one is initially sending or receiving a call. The ring duration
length depends on the local telecom ring-pattern length.
To change the ring volume of the fax
1.
Press
Menu
.
2.
Use the
<
or the
>
button to select System setup, and then press .
3.
Use the
<
or the
>
button to select Volume settings, and then press .
4.
Press the
<
or the
>
button once to select Ring volume, and then press .
5.
Use the
<
or the
>
button to select Off, Soft, Medium, or Loud.
6.
Press to save your selection.
NOTE
The factory-set default is Soft.
Changing the all-in-one control-panel key-press volume
The key-press volume controls the sound that is made when an all-in-one control-panel button is
pressed.
To change the all-in-one control-panel key-press volume
1.
Press
Menu
.
2.
Use the
<
or the
>
button to select System setup, and then press .
3.
Use the
<
or the
>
button to select Volume settings, and then press .
4.
Use the
<
or the
>
button to select Key-press volume, and then press .
5.
Use the
<
or the
>
button to select Off, Soft, Medium, or Loud.
6.
Press to save your selection.
NOTE
The factory-set default for the all-in-one control-panel key-press volume is Soft.
46
Chapter 4 Using the all-in-one
ENWW