To modify the parameters of a volume, To omit the selected volumes, To display the tc390 pair status information – HP StorageWorks XP Remote Web Console Software User Manual
Page 111: Viewing the status of truecopy volume pairs (pair, Status)
TrueCopy for z/OS user guide 111
To modify the parameters of a volume:
1.
Select a volume whose parameters to be modified on the Pair Settings Parameter list.
2.
Right-click to display the pop-up menu and click Modify to modify the parameters. A window is
displayed.
3.
Modify the parameters and click Set.
4.
Click Apply on TrueCopy main window.
To omit the selected volumes:
1.
Select the volumes to be omitted from the operation on the Pair Settings Parameter list.
2.
Right-click to display the pop-up menu and click Omit. The volumes selected in
are deleted from
the Pair Settings Parameter list and the deleted volumes have been removed from the pair settings
operations.
3.
Click Apply on the TrueCopy main window.
The Cancel All command deletes all the volumes listed on the Pair Settings Parameter list and all the
volumes have been removed from the pair settings operations. All the volumes can also be deleted from the
list using the Omit command by selecting all of the volumes on the Pair Settings Parameter list. When all
the volumes are deleted from the list (by the Cancel All command or the Omit command), the list status
becomes the Volume list.
Viewing the Status of TrueCopy Volume Pairs (Pair Status)
The Pair Status command can be used to display the TC390 pair status information in detail.
To display the TC390 pair status information:
1.
From the tree, select Display All or a CU number. The Pair Status command can be selected when
Display All or CU number is selected in the tree.
2.
From the Volume list, select a volume whose pair status information to be displayed.