HP StorageWorks XP Remote Web Console Software - Manual (Page 85)

TrueCopy for z/OS user guide 85
Figure 47 Add RCU window – serial interface
For Fibre Channel interface, two types of fibre-channel ports are provided: 4-port and 2-port adapters. The
port mode depends on the port type. Also, each port may have a different PCB mode setting (Standard or
High). Therefore, when you configure paths among the initiator ports, target ports, and RCU target ports,
please study the port modes and specify the correct mode for each port. The following figures shows a
sample TC390 Fibre Channel interface configuration with connections going through switches and the
TC390 Add RCU window used to define this configuration.
Figure 48 Fibre Channel interface connections going through switches