Cquery for serial interface – HP StorageWorks XP Remote Web Console Software User Manual

Page 155

Advertising
background image

TrueCopy for z/OS user guide 155

CRECOVER DEVN(X’dev#’) PRIM(X’ssidserial# X’cca’ X’lss’) SEC(X’ssid’

cmd_param

X’cca’ X’lss’)

[ID(old_volser[new_volser])]

The addressed device must be the R-VOL.

If the first digit of the

cmd_param

is other than

A

, the disk array interprets this command as pair

deletion for TC390 Synchronous or SI390.

Regardless of the number of volume pairs to be deleted, this command ends before the actual pair

deletion is successfully completed. Confirmation by CQUERY or IEA494I console message is

recommended after this command.

CQUERY for Serial Interface

The CQUERY command can be issued to a TC390A pair to determine its detailed pair status as well as its

TC390A pair and group options. The following example shows the output of the CQUERY command with

the VOLUME parameter issued to a TC390A M-VOL.

NOTE:

When the controller emulation type is 3990, the CQUERY command only displays the path types

and path status of the first four paths, even if more than four paths have been added.

CQUERY Output Example: M-VOL/FORMAT/VOLUME

The CRIT box is not used for TC390A (NO is always indicated).

Table 37

Using CRECOVER to delete TrueCopy Async pairs/groups at the RCU

Parameters

Contents

Description

cmd_param

AC000

AC000Specifies that all volume pairs (R-VOLs) in the consistency group whose

consistency status is Suspended-Group should be deleted.

AGP00

AG000Specifies that all volume pairs (R-VOLs) in the consistency group should

be deleted regardless of pair status and consistency status. All pending

recordsets will be settled before deleting the pairs.

AVD00

AV000Specifies that the addressed volume pair (R-VOL) should be deleted

regardless of pair status and consistency status. All pending recordsets for the

addressed pair will be settled before deleting the pair.

[ID(old_volser[new_volser])]

TC390A does not support this keyword. Depending on the timing, the write

command to change the volume serial number may be rejected.

*************** PPRC REMOTE COPY CQUERY - VOLUME ************************

* (PRIMARY) (SECONDARY) *

* SSID CCA SSID CCA *

*DEVICE LEVEL STATE PATH STATUS SERIAL# SERIAL# *

*------ --------- ---------- ----------- --------- --------- *

* 0A32 PRIMARY.. PENDING... ACTIVE.. 7700 32 7740 12 *

* CRIT(NO) A00SNG030982 000000030954 *

* PATHS SAID/DEST STATUS: DESCRIPTION *

* ----- --------- ------ ------------------- *

* 1 001D 0000 01 PATH ESTABLISHED... *

* ---- ---- 00NO PATH............ *

* ---- ---- 00NO PATH............ *

* ---- ---- 00NO PATH............ *

* IF STATE = PENDING/SUSPEND: FIRST CYL OUT OF SYNC = 00117 *

* LAST CYL OUT OF SYNC = 03338 *

* PERCENT OF COPY COMPLETE = 004% *

*************************************************************************

Advertising