Port tree and port list, Figure 33 standard speed, two ports per row, 33 standard speed, two ports per row – HP StorageWorks XP Remote Web Console Software User Manual
Page 69
69
Port Tree and Port List
Clicking Port in the Display box displays Port tree and the Port list. The Port tree displays the channel
adapters and the port types. Only the ports that are installed and can be selected for remote copy
operations are displayed.
Figure 32
RCU Operations window with the Port option button selected
•
Port: Cluster and port number (CL1-A to CL2-R).
•
Type: Port type (Initiator, Target, RCU Target, External, RCP, or LCP).
•
PCB Mode: Speed mode of the port, only for the Fibre ports (standard, high-speed, or high-speed (2
port).
•
CU#: Range of CU images: 16 CU: 00-0F (00 through 0F), 10-1F (10 through 1F).
NOTE:
High-speed (2 port) mode is available only if the XP disk array has firmware version
21.06.22 or later installed.
The port information in each row depends on the type of channel adapter.
•
1 port in one row (standard).
•
2 ports in one row (standard).
•
2 ports per row (high-speed, 2 port).
•
4 ports in one row (high-speed).
Figure 33
Standard speed, two ports per row