HP StorageWorks XP Remote Web Console Software - Manual (Page 162)

162 TrueCopy for the XP128/XP1024/XP10000/XP12000
CQUERY Output Example: M-VOL/Paths/Format
The following example shows the output of the CQUERY command issued to the TC390 RCU that has a
blocked path due to the CGROUP/FREEZE command.
CQUERY Output Example: R-VOL/Paths/Format
CQUERY/VOLUME. The following example shows the output of the CQUERY command issued to a TC390
M-VOL that has been suspended by the CGROUP/RUN command. As shown in the example, CQUERY
issued to an M-VOL also indicates the status of the FREEZE option: CGRPLB(YES) = enabled, CGRPLB(NO)
= disabled.
****************** PPRC REMOTE COPY CQUERY - PATHS ********************
* PRIMARY UNIT: SERIAL#= 000000090217 SSID= 00F8 *
* FIRST SECOND THIRD FOURTH *
* SECONDARY SECONDARY SECONDARY SECONDARY *
*SERIAL NO: 000000090217 ............ ............ ............ *
* SSID: 00F8 0000 0000 0000 *
* PATHS: 1 0 0 0 *
* SAID DEST S* SAID DEST S* SAID DEST S* SAID DEST S* *
* --------- -- --------- -- --------- -- --------- -- *
* 1: 0020 FF04 10 ---- ---- 00 ---- ---- 00 ---- ---- 00 *
* 2: ---- ---- 00 ---- ---- 00 ---- ---- 00 ---- ---- 00 *
* 3: ---- ---- 00 ---- ---- 00 ---- ---- 00 ---- ---- 00 *
* 4: ---- ---- 00 ---- ---- 00 ---- ---- 00 ---- ---- 00 *
* *
* S* = PATH STATUS: *
* 00=NO PATH 01=ESTABLISHED 02=INIT FAILED *
* 03=TIME OUT 04=NO RESOURCES AT PRI 05=NO RESOURCES AT SEC *
* 06=SERIAL# MISMATCH 07=(RESERVED) 08=(RESERVED) *
* 09=(RESERVED) 10=CONFIGURATION ERROR *
***********************************************************************
*************** PPRC REMOTE COPY CQUERY - PATHS ********************
* PRIMARY UNIT: SERIAL#= ............ SSID= 0000 *
* FIRST SECOND THIRD FOURTH *
* SECONDARY SECONDARY SECONDARY SECONDARY *
*SERIAL NO: 000000090217 ............ ............ ............ *
* SSID: 00F8 0000 0000 0000 *
* PATHS: 1 0 0 0 *
* SAID DEST S* SAID DEST S* SAID DEST S* SAID DEST S* *
* --------- -- --------- -- --------- -- --------- -- *
* 1: 0020 FF04 10 ---- ---- 00 ---- ---- 00 ---- ---- 00 *
* 2: ---- ---- 00 ---- ---- 00 ---- ---- 00 ---- ---- 00 *
* 3: ---- ---- 00 ---- ---- 00 ---- ---- 00 ---- ---- 00 *
* 4: ---- ---- 00 ---- ---- 00 ---- ---- 00 ---- ---- 00 *
* *
* S* = PATH STATUS: *
* 00=NO PATH 01=ESTABLISHED 02=INIT FAILED *
* 03=TIME OUT 04=NO RESOURCES AT PRI 05=NO RESOURCES AT SEC*
* 06=SERIAL# MISMATCH 07=(RESERVED) 08=(RESERVED) *
* 09=(RESERVED) 10=CONFIGURATION ERROR *
********************************************************************