Figure 40 history operations window, 40 history operations window – HP StorageWorks XP Remote Web Console Software User Manual
Page 75
75
The History Operations window is updated when the Refresh button (
) is clicked. The information on the
History Operations window is not updated by clicking another tab and then clicking the History
Operations tab again.
Figure 40
History Operations window
The History Operations window contains the following information:
•
Status displays the current status of the history file:
• No history file exist. The history file does not exist.
• Reading a history failed. A failure occurred during referring to the history file.
• Update history... n (%). Updating of the history file is now in progress. “n (%)” indicates the
progress (in %) of the updating process of the history file.
• Complete. Updating of the history file has been completed.
When the updating process is in progress, the checking process automatically continues until the
updating process finishes. The updating process is checked at ten-second intervals.
•
Last Update displays the updated date and time of the history file.
•
The History List displays the history information for the TC390 pairs in the connected disk array. By
default, the list is in the order in which the information are received from the disk array.
History List shows the following information:
• Operation Date/Time: The date and time when the operation was completed.
• Start Date/Time: The date and time when the operation was started.
• Operation: The operations are Pairing Start (add pair operation was started); Pairing Complete
(add pair operation was completed); Pair Delete (the pair was deleted); Suspend Operation (pair
suspending operation was performed); Pair Suspend (Failure) (the pair was suspended because of
a failure); Pair Resync. Start (resume pair operation was started); and Pair Resync. Complete
(resume pair operation was completed).
• VOL: CU number and LDEV number of the operated volume.
• Paired VOL: CU number and LDEV number of the paired volume.
• Copy Time: The time taken for the operation (from the start of the operation to the end). Displayed
only for Pairing Complete and Pair Resync. Complete operations.