HP StorageWorks XP Remote Web Console Software - Manual (Page 200)

200 TrueCopy for the XP128/XP1024/XP10000/XP12000
NOTE: ErrorCode-6005 xxxx corresponds to the Command View XP or XP Remote Web Console error
codes.
HXRC Device Blocking and Load Balancing
The XP128/XP1024/XP10000/XP12000 supports the IBM-compatible specifications for XRC device
blocking and load balancing control. In addition, the XP128/XP1024/XP10000/XP12000 provides more
flexible tuning methods for load balancing control under HXRC environments as shown below.
Device Blocking Function
The XP128/XP1024/XP10000/XP12000 HXRC function supports the new TSO command specifications
for the XRC device blocking function.
• DONOTBLOCK option. DONOTBLOCK is a new option parameter that is specified by the XADDPAIR
command.
• DONOTBLOCK: The amount of write data for application programs are blocked by the threshold
specified by SDM. Default value is “500”HEX RECSETs.
• Specified: When the DONOTBLOCK option is specified to a logical device, the amount of write
data of application programs for the logical device is not blocked.
• XQUERY. The number of RECSET and the current threshold value corresponding to a logical device will
be displayed by the XQUERY command.
CAUTION: If you specify the DONOTBLOCK option for too many devices, a sidefile puncture condition
will occur. Use caution when determining the appropriate tuning (devices with DONOTBLOCK option, SVP
modes) for your operational environment.
- 5004 API error(SetCreatePair).
ErrorCode=6005 xxxx
An error occurred during the create pair operation.
- 5005 API error(SuspendPair).
ErrorCode=6005 xxxx
An error occurred during the suspending pair
operation.
- 5006 API error(ChangePairOption).
ErrorCode=6005 xxxx
An error occurred during the changing pair
operation.
- 5007 API error(DeletePair).
ErrorCode=6005 xxxx
An error occurred during the deleting pair
operation.
- 5008 API error(StartCreatePair).
ErrorCode=6005 xxxx
An error occurred during the copy start instruction.
- 5020 API retry(GetPairStatus256). An error occurred at retrying the getting pair status
operation.
- 4006 Too many pairs (SetList/AddList). The number of pairs that is specified in the device
list exceeds the maximum value.
- 6666 Abort by operator. The operation is interrupted by a user.
- 6667 Abort by unlock. The operation is interrupted according to the modify
mode timeout.
Table 61 TrueCopy scripting error codes (continued)
Message
ID
Internal
Code
Error Message Error Description