Aastralink web ui – Aastra Telecom AastraLink Pro 160 User Manual
Page 124
Configuring System Settings
4-14
41-001190-02 Rev. 01, Rel. 1.2
AastraLink Pro 160 Administrator Guide
3
In the “Push Button Alert Text” field, specify a custom alert text message. The default text
message is:
“The Push Button has been pressed.”
4
(optional) The AastraLink Pro has a default message announcement that announces after pushing
the relay button. To record a custom announcement, click <Record Custom Message>.
Your IP phone rings. Follow the instructions as prompted by your IP phone to record and save a new
message.
5
(optional) You can upload a message announcement by clicking <Browse> to go to the location
where your message announcement is stored. This file must be a “.wav” file. Upload the file to the
AastraLink Pro.
6
Specify how you want to be notified when the trigger is activated, as follows:
•
To be notified on the phone TUI, click in the check box Send Message to Phone.
•
To be notified by email, click in the check box Send Message to Email.
7
Click <Save> to save your changes.
AastraLink Web UI
Step
Action