Aastra Telecom AastraLink Pro 160 - Manual (Page 50)

Managing IP Phone Users
3-6 41-001190-02 Rev. 01, Rel. 1.2
AastraLink Pro 160 Administrator Guide
You can set the following Aastra IP phone user account parameters:
• User Enabled
Enables or disables user accounts from obtaining service on the AastraLink
Pro. Default is enabled. When a phone is disabled, it still retains the
configuration for the phone in the system. Disabled accounts cannot make or
receive calls, and cannot log into the Web UI. Also, the Corporate Directory
lists only enabled accounts. For more information about configuring User
Accounts, see
“Enabling/Disabling User Accounts” on page 3-29 .
• Secondary Enabled
Enables or disables secondary non-Aastra SIP phone and softclient user
accounts from obtaining service on the AastraLink Pro. Default is disabled.
For information on the dial plan settings for a secondary phone on the
AastraLink Pro, see
“Secondary Non-Aastra SIP Phones and Softclients” on
page 3-31 .
• SLA Enabled
Enables or disables the ability of this phone to participate in the Shared Line
Appearance (SLA) feature. If disabled, the phone is accessible via PBX “pool
line” dial plan only, and SLA calls do not route to this phone. Default is
enabled.
Note: SLA is not supported on the DECT 420d handsets and 6751i model phones.
For more information about SLA, see Chapter 4, “Configuring FXO Lines for
Shared Line Appearance (SLA)” on page 4-60 .
• Private Extension
Enables or disables directory privacy for individual extensions. If this feature
is enabled, the User’s extension does not display in the Corporate Directory
and is not listed in the dial-by-name directory. For more information about
Private Extensions, see
“Enabling/Disabling an Extensions Directory
Privacy” on page 3-32 .