Aastra Telecom AastraLink Pro 160 - Manual (Page 346)

Remote Office Configuration of the AastraLink Pro 160
B-12 41-001190-02 Rev. 01, Rel. 1.2
AastraLink Pro 160 Administrator Guide
15 Enter the SIP port for the Home Router. For example, you can enter 51620.
The Phone prompts for an RTP port.
16 Enter the RTP port for the Home Router. For example, you can enter 51720.
The Phone prompts for an HTTPS port.
17 Enter the HTTPS port for the Home router. For example, you can enter 51510.
Note: For routers with half-cone NAT, or routers that don’t allow separate port forwarding, use the
value of 9600 instead of 51510.
After the phone reboots into service, the Users List shows it as a remote device.
AastraLink Pro 160 Remote Office Configuration
Step Action
Remote
Device