Aastra Telecom AastraLink Pro 160 - Manual (Page 58)

Managing IP Phone Users
3-14 41-001190-02 Rev. 01, Rel. 1.2
AastraLink Pro 160 Administrator Guide
17 (For MBU units only) If you selected a value of “Aastra420d” for the Phone Type in step 15, in the
Mobility Base Unit field, select the 420d handset for which you want to apply this user information.
This field specifies the 420d handset and MBU number for which you want to apply the current phone
information. This drop-down list shows the available handsets (max 8 per MBU) for all currently
provisioned MBU-400 units, and is used instead the of MAC address field for 420d phone model.
For more information about adding MBUs to your AastraLink network, see Chapter 4, “Mobility Base
Units (MBUs)” on page 4-97 .
18 In the SIP DID Number field, enter the SIP DID number for this user’s phone. The DID number is the
number that an outside caller can dial to reach this phone directly without having to go through the
company’s PBX. The DID is a direct dialed number to this phone.
19 Click <Save> to save your changes.
AastraLink Web UI
Step Action