Aastra Telecom AastraLink Pro 160 - Manual (Page 87)

Configuring Groups
41-001190-02 Rev. 01, Rel. 1.2 3-43
Configuring Aastra IP Phone Accounts
Creating Rules for Groups (Ring and Paging Groups)
When you create a Group, you configure group-forwarding rules for the Group
that determines what happens when an incoming call goes unanswered. The
following table describes the parameters you can set to configure these
group-forwarding rules.
Parameter Description
Name Specifies the name of the Group. Valid values are:
•
Ring Group
• Paging Group
Extension Specifies the extension for the Group.
Note: For more information about assigning
extension numbers, see the section,
“Virtual
Extension Numbers (for Ring and Paging Groups)”
on page 42 .
Password (optional) Specifies the PIN access to a Paging
Group, or the password for voicemail on a Ring
Group.
Voicemail Notification
(Not applicable to Paging
Groups)
Specifies whether or not an email is sent to the Ring
Group to notify of a voicemail that was left by the
incoming caller. Valid values are:
•
Off (default)
• Email
• Email with Audio-Attachment
Note: Ring groups do not have individual email
addresses. When email is configured as the
notification method, the message is sent to the email
addresses in the "My Preferences" of all members of
that ring group (if configured).