Aastra Telecom AastraLink Pro 160 - Manual (Page 40)

Accessing the AastraLink Web UI
2-14 41-001190-02 Rev. 01, Rel. 1.2
AastraLink Pro 160 Administrator Guide
Configuration
The Configuration menu displays the current system and network management
settings. These settings apply to the AastraLink Pro 160 device.
From the Configuration menu, you can view and/or configure the following:
• Specify regional settings
• Set date and time
• Configure Music on Hold
• Configure the Relay Push Button
• Specify the maximum duration of a voicemail and the maximum number of
voicemail messages to store on the AastraLink Pro 160.
• Run the Auto-Tuning Wizard for the FXO lines or manually set the line
dynamic range, echo cancel, RTP-to-line power, and line-to-RTP power
parameters for FXO echo cancellation tuning.
• Specify local network parameters
• Specify local services
• Specify external services
• Specify dial plan settings (enable/disable phone registration, set SIP trunk
mode, set FXS port 'hotline' operation, where going offhook automatically
calls a preconfigured directory (or call group) number, set parked call timeout,
set an administrator password, set an overhead paging PIN, and set paging
and intercom parameters) for phones in your network
• Specify emergency numbers for phones in your network (not applicable to
remote phones)
• Specify barred numbers (blocked numbers) for phones in your network
System Menu
Network Menu
Dial Plan Menu