Aastra Telecom AastraLink Pro 160 - Manual (Page 334)

Reinstalling Aastra IP Phones at the Central Site
A-14 41-001190-02 Rev. 01, Rel. 1.2
AastraLink Pro 160 Administrator Guide
8 Select <Restart> when prompted to restart the phone.
The IP phone reverts back to its factory default settings.
9 Disconnect, then reconnect, your IP phone to your Ethernet Hub/Router.
If your IP phone has been successfully reset to “local mode,” it should start up, retrieve its
configuration from the AastraLink, and then prompt you to specify a user name. You can then
continue to register the IP phone as describe in the section
“Registering IP Phones At the
Central Site” on page A-4 .
Step Action