Aastra Telecom AastraLink Pro 160 - Manual (Page 203)

Configuring VoIP Settings
41-001190-02 Rev. 01, Rel. 1.2 4-93
Configuring AastraLink Pro 160 System and Network Parameters
The administrator is now ready to configure the other end of the trunk, and does
the following steps:
1. Logs into the Boston AastraLink device (10.30.60.135).
2. Clicks the dial prefix for the Atlanta AastraLink network: 7 + 0 + (number).
3. Specifies the destination hostname (10.30.50.125), and the same user name as
used for the Boston end of the trunk, then saves the changes.
At this point, the trunk between Atlanta and Boston is complete. To configure the
trunk between Atlanta and Chicago, the administrator repeats these steps, using
the Chicago dial prefix/hostname as the destination end of the trunk.
Note the following examples:
• Figure 4-8 shows the Atlanta /Boston, and Atlanta /Chicago trunks.
• Figure 4-9 shows the Boston/Atlanta, and Boston /Chicago trunks.
• Figure 4-10 shows the Chicago/Atlanta, and Chicago/Boston trunks.
Figure 4-8. Trunks Between Atlanta/Boston and Atlanta/Chicago
Atlanta to Boston
Atlanta to Chicago