Aastra Telecom AastraLink Pro 160 - Manual (Page 340)

Remote Office Configuration of the AastraLink Pro 160
B-6 41-001190-02 Rev. 01, Rel. 1.2
AastraLink Pro 160 Administrator Guide
Column Descriptions
YES UDP 3011 3211 10.50.11.3
YES UDP 3012 3212 10.50.11.3
YES UDP 3013 3213 10.50.11.3
YES UDP 3014 3214 10.50.11.3
YES UDP 3015 3215 10.50.11.3
YES UDP 3016 3216 10.50.11.3
YES UDP 3017 3217 10.50.11.3
YES UDP 3018 3218 10.50.11.3
YES UDP 3019 3219 10.50.11.3
NOTE: For routers with half-cone NAT, or routers that don’t allow
separate port forwarding, use the value of 9600 instead of 51510.
Column Description
Active Indicates whether or not the Office Router
port mapping is active.
Protocol Indicates the protocol currently being used
on the Office Router port during mapping.
Int. Port TCP/UDP ports open on AastraLink
Ext. Port TCP/UDP ports open on t he WAN side of
Route A and ready to forward packets to the
AastraLink ports in the mapping.
IP Address AastraLink’s IP address
Active Protocol Internal Port External Port IP Address