Enable igmpsnooping – Allied Telesis AT-S63 User Manual
Page 347
Advertising
AT-S63 Management Software Command Line Interface User’s Guide
Section III: Snooping Protocols
347
ENABLE IGMPSNOOPING
Syntax
enable igmpsnooping
Parameters
None.
Description
This command activates IGMP snooping on the switch.
Example
The following command activates IGMP snooping:
enable igmpsnooping
Equivalent Command
set ip igmp snoopingstatus=enabled
For information, refer to “SET IP IGMP” on page 348.
Advertising