Allied Telesis AT-S63 - Manual (Page 73)

73
Chapter 4
Simple Network Time Protocol (SNTP)
Commands
This chapter contains the following commands:
ˆ “ADD SNTPSERVER PEER|IPADDRESS” on page 74
ˆ “DELETE SNTPSERVER PEER|IPADDRESS” on page 75
ˆ “DISABLE SNTP” on page 76
ˆ “ENABLE SNTP” on page 77
ˆ “PURGE SNTP” on page 78
ˆ “SET DATE” on page 79
ˆ “SET SNTP” on page 80
ˆ “SET TIME” on page 81
ˆ “SHOW SNTP” on page 82
ˆ “SHOW TIME” on page 84
Note
Remember to save your changes with the SAVE CONFIGURATION
command.