Allied Telesis AT-S63 - Manual (Page 429)

AT-S63 Management Software Command Line Interface User’s Guide
Section IV: SNMPv3 429
SHOW SNMPV3 NOTIFY
Syntax
show snmpv3 notify= notify
Parameter
notify Specifies an SNMPv3 Notify Table entry.
Description
This command displays SNMPv3 Notify Table entries. You can display
one or all of the table entries.
Examples
The following command displays the SNMPv3 Notify Table entry called
“testengtrap1”:
show snmpv3 notify=testengtrap1
The following command displays all of the SNMPv3 Notify Table entries:
show snmpv3 notify