Set switch consoletimer – Allied Telesis AT-S63 User Manual
Page 51
AT-S63 Management Software Command Line Interface User’s Guide
Section I: Basic Operations
51
SET SWITCH CONSOLETIMER
Syntax
set switch consoletimer=
value
Parameter
consoletimer
Specifies the console timer in minutes. The range is 1
to 60 minutes. The default is 10 minutes.
Description
This command sets the console timer, which is used by the management
software to end inactive management sessions. The AT-S63 Management
Software automatically ends a session if it does not detect any
management activity for the duration of the console timer. This security
feature can prevent unauthorized individuals from using your management
station should you step away from your system while configuring a switch.
To view the current console timer setting, refer to “SHOW SWITCH” on
page 60.
Example
The following command sets the console timer to 25 minutes:
set switch consoletimer=25