Allied Telesis AT-S63 - Manual (Page 516)

Chapter 29: GARP VLAN Registration Protocol Commands
516 Section VI: Virtual LANs
SHOW GARP
Syntax
show garp=gvrp
Parameter
garp Specifies the GARP application to display. GVRP is
the only GARP application supported by the AT-9400
Switch.
Note
The online help for this command contains an STP option. This
option is not supported.
Description
This command displays current values for the following GARP application
parameters:
ˆ GARP application protocol
ˆ GVRP status
ˆ GVRP GIP status
ˆ GVRP Join Time
ˆ GVRP Leave Time
ˆ GVRP Leaveall Time
ˆ Port information
ˆ Mode
Example
The following command displays GVRP information:
show garp=gvrp