Set ip arp timeout – Allied Telesis AT-S63 User Manual
Page 563
Advertising
AT-S63 Management Software Command Line Interface User’s Guide
Section VII: Internet Protocol Routing
563
SET IP ARP TIMEOUT
Syntax
set ip arp timeout=
integer
Parameter
timeout
Specifies the ARP cache timeout value The range is 150 to
260000 seconds. The default setting is 600 seconds.
Description
This command sets the ARP cache timeout value. The timer prevents the
ARP table from becoming full with inactive entries. An entry that is not
used for the length of the timeout period is designated as inactive and
deleted from the table.
Example
The following command sets the timer to 400 seconds:
set ip arp timeout=400
Advertising