Allied Telesis AT-S63 - Manual (Page 509)

509
Chapter 29
GARP VLAN Registration Protocol
Commands
This chapter contains the following commands:
ˆ “DISABLE GARP” on page 510
ˆ “ENABLE GARP” on page 511
ˆ “PURGE GARP” on page 512
ˆ “SET GARP PORT” on page 513
ˆ “SET GARP TIMER” on page 514
ˆ “SHOW GARP” on page 516
ˆ “SHOW GARP COUNTER” on page 517
ˆ “SHOW GARP DATABASE” on page 519
ˆ “SHOW GARP GIP” on page 520
ˆ “SHOW GARP MACHINE” on page 521
Note
Remember to save your changes with the SAVE CONFIGURATION
command.