Allied Telesis AT-S63 - Manual (Page 47)

AT-S63 Management Software Command Line Interface User’s Guide
Section I: Basic Operations 47
Note
For a list of the default values, refer to the AT-S63 Management
Software Features Guide.
Your local or remote management session with the switch ends when you
reset the switch. You must reestablish the session to continue managing
the switch.
Examples
The following command configures the switch using the configuration file
named
switch12.cfg :
restart switch config=switch12.cfg
The following command resets the switch to its default values:
restart switch config=none
The following command resets the switch:
restart switch
Equivalent Command
restart reboot
For information, see “RESTART REBOOT” on page 45.