Allied Telesis AT-S63 - Manual (Page 545)

545
Chapter 32
Internet Protocol Version 4 Packet
Routing Commands
This chapter has the following commands:
ˆ “ADD IP ARP” on page 546
ˆ “ADD IP INTERFACE” on page 548
ˆ “ADD IP RIP” on page 550
ˆ “ADD IP ROUTE” on page 553
ˆ “DELETE IP ARP” on page 555
ˆ “DELETE IP INTERFACE” on page 556
ˆ “DELETE IP RIP” on page 557
ˆ “DELETE IP ROUTE” on page 558
ˆ “DISABLE IP ROUTE MULTIPATH” on page 559
ˆ “ENABLE IP ROUTE MULTIPATH” on page 560
ˆ “PURGE IP” on page 561
ˆ “SET IP ARP” on page 562
ˆ “SET IP ARP TIMEOUT” on page 563
ˆ “SET IP INTERFACE” on page 564
ˆ “SET IP LOCAL INTERFACE” on page 566
ˆ “SET IP RIP” on page 567
ˆ “SET IP ROUTE” on page 570
ˆ “SHOW IP ARP” on page 572
ˆ “SHOW IP COUNTER” on page 574
ˆ “SHOW IP INTERFACE” on page 576
ˆ “SHOW IP RIP COUNTER” on page 578
ˆ “SHOW IP RIP INTERFACE” on page 580
ˆ “SHOW IP ROUTE” on page 582
Note
Remember to save your changes with the SAVE CONFIGURATION
command.