Enable rstp – Allied Telesis AT-S63 User Manual
Page 454
Advertising
Chapter 26: Rapid Spanning Tree Protocols Commands
454
Section V: Spanning Tree Protocols
ENABLE RSTP
Syntax
enable rstp
Parameters
None.
Description
This command enables the Rapid Spanning Tree Protocol on the switch.
The default setting for RSTP is disabled. To view the current status of
RSTP, use “SHOW RSTP” on page 462.
You cannot enable RSTP until you have activated it with the ACTIVATE
RSTP command.
Example
The following command enables RSTP:
enable rstp
Advertising