Allied Telesis AT-S63 - Manual (Page 623)

623
Chapter 36
802.1x Port-based Network Access
Control Commands
This chapter contains the following commands:
ˆ “DISABLE PORTACCESS|PORTAUTH” on page 624
ˆ “DISABLE RADIUSACCOUNTING” on page 625
ˆ “ENABLE PORTACCESS|PORTAUTH” on page 626
ˆ “ENABLE RADIUSACCOUNTING” on page 627
ˆ “SET PORTACCESS|PORTAUTH PORT ROLE=AUTHENTICATOR”
on page 628
ˆ “SET PORTACCESS|PORTAUTH PORT ROLE=SUPPLICANT” on
page 636
ˆ “SET RADIUSACCOUNTING” on page 638
ˆ “SHOW PORTACCESS|PORTAUTH” on page 640
ˆ “SHOW PORTACCESS|PORTAUTH PORT” on page 642
ˆ “SHOW RADIUSACCOUNTING” on page 645
Note
Remember to save your changes with the SAVE CONFIGURATION
command.