Myron L 9PTK - Manual (Page 47)

43
displayed (see Figure 22). If cell is dirty, “cell cln” will be
displayed (see Figure 23) (ref. Cleaning Sensors, pg. 50).
Xiv. aUtO OFF
Auto off allows the user to adjust the time the instrument is ON (up to
75 seconds) after each press of a key. Default time is 15 seconds with
60 seconds in “cal” (calibration) mode.
1. Press .
2. Press to display the stored memory records.
3. Press repeatedly until you pass the “cell ch” location.
The display will show “auto oFF” (see Figure 24).
4. Press to initiate. “cal” will be displayed along with “15
sec” or current Auto oFF value (see Figure 25).