Myron L 9PTK - Manual (Page 49)

45
Follow the steps below to set either the KCl, NaCl or 442 calibration
factor to the User solution mode.
1. Press measurement key desired to be “Linked”, i.e., ,
or .
2. Place the Ultrameter III in User mode (ref. SOLUTION
SELECTION, pg. 22, for selecting the User mode).
3. Press arrow key until the menu “linc” appears (see
Figure 27).
4. Press key. The instrument will display “sel” and the
“User” Icon (see Figure 28).
Any additional display of KCl, NaCl or 442 icons indicates
a “Linc” between the User solution and the other solution
displayed.
5. Press or keys to select a Standard Solution to be
linked to the User mode calibration constant (see Figure 29).
“User” is linked to “Kcl”.