Accessing and exiting the command modes, Accessing and exiting the command modes -2 – Avaya Cajun P550R User Manual
Page 19
Chapter 1
1-2
Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1
Accessing and Exiting the Command Modes
Refer to Table 1-2 for an explanation of how to access and exit the
command modes.
Table 1-2. Accessing/Exiting the Command Modes
Router Commands
to
configure the routing
protocols.
From Global mode,
enter router
<protocol> (dvmrp,
igmp, ospf, rip, and
vrrp).
<configure
router:(protocol)#
Interface Commands
to
configure the
interfaces.
From Global mode,
enter interface
<name>.
>(config-if:
<interface-
name>)# type
<ethernet, nbma>
To exit command mode, enter exit.
Table 1-1. Main Command Mode Summaries Continued
Mode
Description
To Access
Prompt
Main Command Modes
Mode
To Access
Prompt
To Exit
User
Log in.
>
Enter exit.
Privileged
From the User
mode, enter enable.
#
Disable or exit returns
to the User mode.
Global
Configuration
From the Privileged
mode, enter
configure.
(configure)#
Exit returns to the
Privileged mode.
Router
Configuration
From Global mode,
enter router
<protocol> (dvmrp,
igmp, ospf, rip, and
vrrp).
For dvmrp, ospf, and
rip: <configure
router:(dvmrp)#
For IGMP or VRRP:
<configure>#
Exit returns to the
Global Configuration
mode.
End returns to the
Privileged mode.
Interface
Configuration
From Global mode,
enter interface
<name>
(configure-if)#
Exit returns to the
Global Configuration
mode.
End returns to
Privileged mode.