Avaya Cajun P550R - Manual (Page 650)

Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1 32-5
VLAN
set vlan (frame format)
Command Mode
Configure
Description
This command modifies the frame tagging format of the switch
port(s) bound to the specified VLAN.
Guidelines
There are two forms of the command.
— set vlan <vlan-id> …: Modifies the frame format for the
specified switch port(s) on the VLAN specified by <vlan-
id>.
— set vlan name <vlan-name> …: Modifies the frame
format for the specified switch port(s) on the VLAN
specified by <vlan-name>.
The switch port argument(s) take any number of switch port
specifications separated by either commas or whitespace. The two
different switch port specifications are shown below.
individual switch port: <mod-num>/<port-num>
■
switch port range: <mod-num>/<port-num>-<port-num>
Syntax
Table 32-3 lists the parameters, keywords, and arguments for the set
vlan (frame format) command.
Table 32-3. Parameters, Keywords, Arguments
To Enable: set vlan {<vlan-id> | name <vlan-name>} <mod-swport-
range>[...,<mod-swport-range>] frame-format {clear | from-port}
Name Definition
vlan-id Specifies the VLAN the switch port is bound to by its VLAN ID.
vlan-name Specifies the VLAN the switch port is bound to by its name.