Avaya Cajun P550R - Manual (Page 52)

Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1 3-5
Appletalk
appletalk address
Command Mode
Interface
Description
Configure an Appletalk Phase I Address for an Interface. The
no form of this command removes the Appletalk interface
itself.
Syntax
Table 3-3. Parameters, Keywords, Arguments
Sample Output
The following example enables an Appletalk phase 1 address
for on the network node labeled foo.
(configure)# appletalk address foo
Systems
Avaya P550R/P580/P880/P882 Multiservice Switches.
To Enable: appletalk address <network.node>
To Disable: [no] appletalk address
Name Definition
network.node • network - A 16-bit network number between 0
and 66279.
• node - An 8-bit node number between 0 and 254.
Separate the network and node values with a period. When
omitted, the Appletalk address defaults to 0.0.