Set diffserv plp, Set diffserv plp -11, Command mode – Avaya Cajun P550R User Manual
Page 468: Description, Syntax, Systems
Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1
23-11
80-Series QoS
set diffserv plp
This command is for future functionality and is not currently
supported.
Command Mode
Global Configuration
Description
Assigns a packet loss probability (PLP) to a DiffServ code point
(DSCP).
Syntax
* Note: While the PLP for a DSCP can be configured and displayed,
the PLP is applied only when RED is enabled on a port.
Systems
■
Avaya P550R and P880 Multiservice Switches, 80-series
modules only.
■
Avaya P580 and P882 Multiservice Switches
To Set:
set diffserv plp {low | high} dscp <dscp-start-range> [<dscp-end-range>]
Table 3. Keywords, Arguments, and Options
Keyword, Argument
or Option
Definition
{low | high}
The PLP that you want to assign.
<dscp-start-range>
The first DSCP in the range of DSCPs that
you want to assign the PLP to. DSCPs
range from 0 to 63.
[<dscp-end-range>]
The last DSCP in the range of DSCPs that
you want to assign the PLP to. DSCPs
range from 0 to 63.