Avaya Cajun P550R - Manual (Page 315)

Chapter 14
14-38 Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1
show intelligent-multicast static-client
Command Mode
User
Description
Displays all statically configured client ports for a given Intelligent
Multicast session.
* Note: If a static session is created with ALL VLANs, then you
must specify "VLAN all" to see the clients. If a static
session is created with an IP address, then you cannot
use the MAC address to see the clients.
Syntax
Table 14-31. Parameters, Keywords, Arguments
Sample Output
The following example displays the Intelligent Multicast client ports
for the multicast session created with all VLANs.
> show intelligent-multicast static-client
225.1.1.2 vlan all
IM ClientPort Application
---- ------------------------------
1 3.2 Mgmt : 225.1.1.2
Systems
Avaya P550R/P580/P880/P882 Multiservice Switch
To
View: show intelligent-multicast static-client {<group-address>|mac-address
< mac-address>} vlan {all|<vlan-id>|name <vlan-name>}
Name Definition
group-address The IP address of the multicast group.
mac-address The MAC address associated with this entry:
vlan The choices are:
• all - The static session or client is created for all
VLANS.
• vlan-id - A session or client is created for a specific
VLAN only identified by numerical ID.
• name - A session or client is created for a specific
VLAN only identified by VLAN name.