Avaya Cajun P550R - Manual (Page 94)

Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1 5-7
Console
set console stopbits
Command Mode
Configuration
Description
Sets the serial console port stopbits to 1 or 2 bits wide. The default
setting is 1.
Stopbits is not compatible with the serial console port configured in
PPP mode. The stopbits parameter cannot be accepted or saved
when the serial console port is configured as PPP mode.
However, to configure the serial console port stopbits parameter, the
serial console port can be configured as TTY mode and the stopbits
parameter set. The serial console port can then be reconfigured as
PPP mode. The stopbits parameter is saved until the console serial
port is reconfigured as TTY mode.
Syntax
Table 5-6. Parameters, Keywords, Arguments
Sample Output
This example sets the serial console port stopbits to 2 bits
wide
<configure># set console stopbits 2
Systems
Avaya P550R/P580/P880/P882 Multiservice Switch
To Enable: set console stopbits {1|2}
Name Definition
1|2 A required parameter that indicates to the serial
console port the width of the stopbits. Stopbits is not
compatible with the serial console port configured in
PPP mode.