Avaya Cajun P550R - Manual (Page 214)

Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1 11-13
IP-RIP
timers basic
Command Mode
Configure
Description
Adjusts RIP network timers. The no form of this command
restores the default timers. The default for the update timer
is 30 seconds, and the invalid time default is 120 seconds.
Syntax
Table 11-10. Parameters, Keywords, Arguments
Sample Output
The following example sets the update value to 60 seconds.
(configure router:rip)#
timers basic 60 120
Systems
Avaya P550R/P580/P880/P882 Multiservice Switch
To Set: timers basic <update> <invalid>
To Set
Default
Value: no timers basic
Name Definition
update Rate, in seconds, updates are sent. This is the fundamental
timing parameter of the routing protocol [Range 10-50 sec].
invalid Interval of time, in seconds, after which a route is declared
invalid. This value should be at least three times the value of
update [range 1 to -1].
A route becomes invalid when there is an absence of updates
that refresh the route. The route then enters holddown. The
route is marked inaccessible and advertised as unreachable.
However, the route is still used for forwarding packets.