Avaya Cajun P550R - Manual (Page 531)

Chapter 26
26-6 Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1
set spantree maxage
Command Mode
Configuration
Description
Sets the maximum message age for a bridge. The default age time is
20 seconds.
Syntax
Table 26-5. Parameters, Keywords, Arguments
Sample Output
The following example sets the spanning tree maximum age to 25
seconds.
<configure># set spantree maxage 25 802.1D
Bridge MaxAge Successfully set to 25
Systems
Avaya P550R/P580/P880/P882 Multiservice Switch
To Enable: set spantree maxage <maxage-value> {802.1D|vlan {<vlan_id> name
<vlan-name}}
Name Definition
maxage-value The maximum age value for the bridge, in seconds.
The range is 6-40 seconds.
802.1D Configure the IEEE 802.1D Legacy Bridge.
Note: The 802.1D bridge can only be modified when
in ieee config mode.
vlan-id Configure a per-vlan or dual-layer bridge by using
the VLAN’s vlan ID.
Note: LAN bridges can only be modified when in per-
vlan or dual-layer mode.
vlan-name Configure a per-vlan or dual-layer bridge by using
the VLAN’s name.
Note: VLAN bridges can only be modified when in
per-vlan or dual-layer mode.