Avaya Cajun P550R - Manual (Page 343)

Chapter 18
18-2 Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1
set port network-error-detection
Command Mode
Configure
Description
Sets NEDR on a range of modules.
Syntax
To Set: set port network-error-detection {<mod-port-range> | <all>} [action
{notify | disable-port | off}] [rising-threshold <rising-threshold-
value>] [falling-threshold <falling-threshold-value>] [interval
<interval seconds>]
Table 18-1. Parameters, Keywords, Argument
Keywords,
Arguments and
Options
Explanation
<mod/port-range> The slot number of the module, and, either port number, or
range of port numbers. Enter the port ranges in the format
Px -
Py . For example:
• To specify port 1 on the module in slot 3, enter 3/1.
• To specify ports 1 through 5 on the module in slot 3, enter
3/1-5.
all Disables NEDR on all ports on all modules in the switch. all can
be used only with off.
action {notify |
disable-port | off} Action that NEDR performs when the rate of errors exceeds the
threshold. The options are:
notify - Logs the event in the event log
disable-port - Disables the port and logs the event in the event
log.
Note: A port will be disabled if the rate of errors equals or
exceeds the threshold. Make sure a redundant protocol
is configured.
off - Disables NEDR on the port or ports that you specify.
The default setting is notify.