Avaya Cajun P550R - Manual (Page 90)

Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1 5-3
Console
set console databits
Command Mode
Configuration
Description
Sets the console serial port’s databit width. The default value is 8.
* Note: This command is not applicable when the console serial
port is configured in PPP mode. The input will not be
accepted or stored when the console serial port is
configured in PPP mode.
However, if the console serial port is configured as TTY
mode and the databits width is configured, the console
serial port can be changed to PPP mode and the databit
width is saved until TTY mode is restored.
Syntax
Table 5-2. Parameters, Keywords, Arguments
Sample Output
This example sets the databit width for the console serial port to 7.
<configure># set console databits 7
Systems
Avaya P550R/P580/P880/P882 Multiservice Switch
To Enable: set console databits {7|8}
Name Definition
7|8 This is a required parameter. The number indicates
the number of bits used in the data stream.