Avaya Cajun P550R - Manual (Page 395)

Chapter 20
20-8 Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1
Systems
Avaya P550R/P580/P880/P882 Multiservice Switches.
• Use the layer 2 priority in the
packet to classify all TCP
traffic that has a:
— Source IP address in the
5.5.5 subnet
— Destination IP address in
the 6.6.6 subnet
— Destination port that is
less than 2
• Permit TCP connections that
meet this criteria
access-list MyAccessList2 8 permit
use-l2 tcp 5.5.5.0 0.0.0.255 6.6.6.0
0.0.0.255 lt 2 established
• Use the DSCP to classify all
UDP traffic that has a:
— Source IP address of
7.7.7.7
— Destination IP address of
8.8.8.8
— Destination port
between 33 and 44
• Mask the three least
significant bits of the DSCP
access-list MyAccessList2 9 permit
use-diffserv mask udp host 7.7.7.7
host 8.8.8.8 range 33 44
• Assign a priority of 7 to all
TCP traffic that has a:
— Source IP address of
9.9.9.9
— Destination IP address of
3.3.3.3
— Destination port
between 55 and 66
• Permit TCP connections that
meet this criteria
access-list MyAccessList2 10 permit
use-priority 7 tcp host 9.9.9.9 host
3.3.3.3 range 55 66 established
To . . . Continued Enter . . .
3 of 3