Avaya Cajun P550R - Manual (Page 397)

Chapter 20
20-10 Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1
Table 20-3. Parameters, Keywords, Arguments
Sample Output
The following command enables the access-list fwdrules:
<configure># ip access-group fwdrules
Systems
Avaya P550R, P580, P880, and P882 Multiservice Switches
Name Definition
access-list-name The name of the access list.
[default-action-deny] Sets the default action to deny. When this option is
enabled, the switch blocks all traffic that does not match
an access rule in the enabled ACL.
This option is a global setting and is not available in the
Web Agent. If you use the CLI to enable this option and
then use the Web Agent to enable a different ACL, the
default-action-deny option remains enabled.
To disable this option, enter ip access-group <group
name> and omit the [default-action-deny] option. For
<group name>, you can enter:
• The name of the currently enabled access list to
retain its enabled status.
OR
• The name of a different access list to enable it.