Avaya Cajun P550R - Manual (Page 300)

Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1 14-23
Intelligent Multicast
set intelligent-multicast static-client-port
Command Mode
Configure
Description
Allows the user to manually add a client port to a static Intelligent
Multicast session.
Syntax
Table 14-19. Parameters, Keywords, Arguments
Sample Output
The following example assigns port 3.11 to a session for multicast
group 229.10.10.10 on VLAN 4.
<configure># set intelligent-multicast
static-client-port 229.10.10.10 vlan 4 port
3/11
Multicast Client successfully created
Systems
Avaya P550R/P580/P880/P882 Multiservice Switch
To Configure: set intelligent-multicast static-client-port {<group-address>|mac-
address <mac-address>} vlan {all|<vlan-id>|name <vlan-name>}
port <mod-port-spec>
Name Definition
group-address The multicast IP address of a static multicast session
mac-address The multicast MAC Address of a static non-IP multicast
session.
vlan The keyword for per VLAN commands.
• all - All VLANS.
• vlan-id - The numerical ID of a specific VLAN.
• name - The VLAN name.
port The client port in the multicast session. < mod-port-spec >
is the port specifier for the static multicast client.