RADWAG MYA 5.3Y.F1 Microbalance - Manual (Page 126)

- 126 -
10. Tare [product’s tare value, set automatically on selecting a
product from the database]
11. Price [Unit price of a product]
12. PGC mode [control mode (Non-destructive average tare, Non-
destructive empty – full, Destructive full – empty,
Destructive empty – full)]
13. Batch [measuring batch for control: Non-destructive
empty – full, Destructive full – empty, Destructive
empty – full ]
14. Unit [product measuring unit]
15. Batch quantity [Option available only for <PGC> mode, specifies
controlled product batch quantity]
16. Average tare estimation time interval [Option available only for
<PGC> mode, specifies minimal time interval
needed for estimation of a packaging average
tare; given in [h]; if software detects that pre-set
time interval has passed it displays a message
<Estimate average tare>. It is the user who
decides whether to estimate the tare again or not.
The message has an informative function only.
17. Numer of packagings [Option available only for <PGC> mode,
specifies number of packagings needed for
estimation of average tare
18. Internal control [Option available only for <PGC> mode, allows for
specification of internal control criteria accordant
with company standards for a given product]
19. Density [product’s density, used for compensating air
buoyancy, as sample density] - [g/cm 3 ]
20. Shelf-life time in days
21. Date [Set product’s date (constant)]
22. VAT [VAT value related to a product]
23. Ingredients [Editing field for inserting names of ingredients used
for preparing a product, e.g. if a product is a mixture,
or if a product requires additional description of its
features or application]
24. Printout [printing a template assigned to a product]
CAUTION:
Remember to assign products to corresponding functions, as some of data
values is attributed according to their modes, e.g. thresholds in
<Checkweighing> mode are set in [g], while thresholds in <Parts counting>
mode are set in [pcs]. The values are selected automatically depending on
which mode is enabled while entering a database.
27.3. Weighing records
Each measurement result sent from a balance to a printer or a computer is
saved in the database of weighing records (see an exception – point 10.8. –
Result control). Balance user can preview data from each weighing record.
Procedure: