RADWAG MYA 5.3Y.F1 Microbalance - Manual (Page 41)

- 41 -
14. PROFILES
A Profile is a data pack determining:
o
functioning of working modes, e.g. parts counting, percent setup, etc.,
o
what data is displayed during working mode operation,
o
which function keys are active,
o
which measuring units are accessible
o
which criteria are mandatory for balance’s speed of operation and
measurement stability,
Balance software enables creating numerous profiles, which in practice
provides:
o
each balance user to create their own and individual operating
environment
o
balance operation can be easily programmed by activating function keys
and information on process which are (improving ergonomics of
operation)
14.1. Creating a profile
A default profile in a balance is named <Home>. Balance Administrator can
create new profiles by:
− Copying an already existing profile and its modification,
− Creating a new profile.
Copying an existing profile
Procedure:
•
Enter balance’s main menu by pressing Setup key,
•
Enter submenu < Profiles>,
•
Press and hold an entry with profile name that should be copied,
•
A menu is opened referring to available options:
o
Edit
o
Delete
o
Copy
o
Cancel
•
Select option <Copy>
•
A new profile is created named <Copy name>, and all setting are identic
with the copied profile,
•
After copying change necessary data in a profile: (name, etc.)
Creating a new profile
Procedure:
•
Enter balance’s main menu by pressing Setup key,
•
Enter submenu < Profiles>,
•
Press key, which opens a message box: <Create new record?>,
•
Accept the message box by pressing key. The software automatically
adds a new record and enters its editing mode.
Caution:
Adding a profile is only enabled after logging in as an Administrator.