RADWAG MYA 5.3Y.F1 Microbalance - Manual (Page 62)

- 62 -
18. DOSING
Working mode< Dosing> enables carrying out the sampling process,
until obtaining a pre-defined target mass.
Working mode activating procedure
•
while in the main window, press soft key located in the upper bar of the
display, which opens a submenu <Working modes> with selection of
available working modes,
•
select < Dosing > mode, the software automatically returns to the main
window and displays pictogram in the upper bar.
The grey coloured workspace contains the following data:
o
Tare
o
Gross
o
Target value
o
Tolerance – percent [%] value related to the target value
o
Product
On selecting the dosing mode, the display contains the following quick
access keys in the bottom bar:
1. Setup – access to balance’s menu
2. Print header – print of data declared in the header
3. Print footer – print of data declared in the footer
4. Database of products – selection of products from corresponding
database
5. Set tare – field for setting numeric value of tare
6. Target value – for declaring the Target value of dosing process